Key Benefits
- Measures vitamin D status
- Quick and easy
- In-depth knowledge
- Track your progress
- Anonymous test results from independent laboratory
Shine a light on your health
Zinzino’s VitaminD Test is an easy self-test for analyzing the vitamin D levels in capillary blood obtained from a fingertip using a Dried Blood Spot (DBS) technique. A DBS is scientifically proven to be as accurate as a venous blood sample when vitamin D status is to be analyzed. All it requires is 1 to 2 drops of blood from the fingertip on a Whatman® filter paper and it takes less than a minute to complete. VITAS Analytical Services in Norway will analyze your current vitamin D status and the result is anonymous. The status can vary throughout the year depending on sun exposure, diet where you live, and food supplementation. Therefore the recommended test interval is 120 days. Using your personal test ID you will get in-depth personalized recommendations based on your vitamin D status in order to optimize it.*
How does it work?
1. Take your test
Start by simply pricking your finger and putting 1–2 drops of blood on a filter paper.
2. Activate your test
Register your test by entering your test ID and filling out the form. All data is anonymous.
3. Start your journey
Benefit from a clear starting point for your journey to a normal functioning immune system. Gently adjust and maintain your optimal vitamin D status throughout the year.
4. Wait for the analysis
Vitas Analytical Services has more than 25 years of experience with cutting-edge knowledge and technology, which guarantees that they analyze your sample independently and protect your privacy.
5. Get your results
Your results are accessible and shown in our easy-to-understand graphics within 10-20 days.
6. Re-test your levels
Vitamin D uptake from sun exposure varies in many parts of the world throughout the year, and restoring your status generally takes 3–4 months of consuming vitamin D supplements, depending on the dose and your individual status. We recommend taking a new test every 4 months to track your progress and ensure you reach and maintain your optimal vitamin D status.
What we measure*
There are different methods to assess stores of vitamin D in your body and we use best practice to ensure our accuracy of analysis is superior. A 25-hydroxyvitamin D test is the best way to monitor vitamin D levels as it measures the 25(OH)D, also called calcidiol, in your blood.
The test reflects all three sources of vitamin D; from food, supplements and skin synthesis, and determines if your vitamin D levels are optimal, too high or too low.
The normal range of vitamin D is measured as nanograms per milliliter (ng/mL) or nanomoles per liter (nmol/L). Nmol/L is the most common way of showing the vitamin D status. However, in the US, and a handful of other countries, the same levels are measured using ng/mL. Therefore, when the test results are presented, it is possible to select which measurement unit to be shown.
* These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease
Zinzino’s VitaminD Test is an easy self-test for analyzing the vitamin D levels in capillary blood obtained from a fingertip using a Dried Blood Spot (DBS) technique. A DBS is scientifically proven to be as accurate as a venous blood sample when vitamin D status is to be analyzed. All it requires is 1 to 2 drops of blood from the fingertip on a Whatman® filter paper and it takes less than a minute to complete. VITAS Analytical Services in Norway will analyze your current vitamin D status and the result is anonymous. The status can vary throughout the year depending on sun exposure, diet where you live, and food supplementation. Therefore the recommended test interval is 120 days. Using your personal test ID you will get in-depth personalized recommendations based on your vitamin D status in order to optimize it.*
How does it work?
1. Take your test
Start by simply pricking your finger and putting 1–2 drops of blood on a filter paper.
2. Activate your test
Register your test by entering your test ID and filling out the form. All data is anonymous.
3. Start your journey
Benefit from a clear starting point for your journey to a normal functioning immune system. Gently adjust and maintain your optimal vitamin D status throughout the year.
4. Wait for the analysis
Vitas Analytical Services has more than 25 years of experience with cutting-edge knowledge and technology, which guarantees that they analyze your sample independently and protect your privacy.
5. Get your results
Your results are accessible and shown in our easy-to-understand graphics within 10-20 days.
6. Re-test your levels
Vitamin D uptake from sun exposure varies in many parts of the world throughout the year, and restoring your status generally takes 3–4 months of consuming vitamin D supplements, depending on the dose and your individual status. We recommend taking a new test every 4 months to track your progress and ensure you reach and maintain your optimal vitamin D status.
What we measure*
There are different methods to assess stores of vitamin D in your body and we use best practice to ensure our accuracy of analysis is superior. A 25-hydroxyvitamin D test is the best way to monitor vitamin D levels as it measures the 25(OH)D, also called calcidiol, in your blood.
The test reflects all three sources of vitamin D; from food, supplements and skin synthesis, and determines if your vitamin D levels are optimal, too high or too low.
The normal range of vitamin D is measured as nanograms per milliliter (ng/mL) or nanomoles per liter (nmol/L). Nmol/L is the most common way of showing the vitamin D status. However, in the US, and a handful of other countries, the same levels are measured using ng/mL. Therefore, when the test results are presented, it is possible to select which measurement unit to be shown.
* These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease
Taking the test
1. Zinzino Test is an approved in vitro diagnostics product for personal blood sample collection at home.
- First wash your hands with soap and rinse well with warm water and dry them.
2. Take out the sample card from the paper envelope. Save the envelope for later use.
Tear off the SAVE part on the sample card and take a picture of the test ID. You can only see your test result with your anonymous test ID. Place the card with the two circles facing up on the table.
3. Stimulate blood flow by making big circles with your arm or shaking the hand downwards for 20 seconds.
4. Take out the single-use lancet. Remove the transparent safety cap and the lancet is ready to use. Use the alcohol wipe to clean the tip of your finger (middle finger is recommended).
Place the lancet against the lower part of the fingertip facing the collection paper on the table. Push the top of the lancet towards the finger until you hear a click. The lancet will automatically make a small prick in the finger.
5. Do not touch the filter paper with your fingers.
6. Fill one circle at a time with blood. Squeeze your finger gently and wait for a drop of blood to fall inside the circle by itself. If one drop of blood does not cover the circle, allow one more drop from your finger to drip immediately. Leave the sample card in a horizontal position at room temperature for at least 10 minutes for the samples to dry well.
7. Insert the sample card back into the paper envelope. Then place the paper envelope into the metal bag and close it.
IMPORTANT:Do not remove desiccant packet inside the metal bag.
8. Place the closed metal bag into the big envelope with the laboratory address on it. NOTE! You must put the correct amount of postage stamps on the envelope before you put in the mail box.
Register your test code on www.zinzinotest.com. This is the web page where you can see your test result later. It takes 10-20 days until your result is ready.
IMPORTANT:Keep the SAVE part of the card. You can only see your test result with your anonymous test ID.
1. Zinzino Test is an approved in vitro diagnostics product for personal blood sample collection at home.
- First wash your hands with soap and rinse well with warm water and dry them.
2. Take out the sample card from the paper envelope. Save the envelope for later use.
Tear off the SAVE part on the sample card and take a picture of the test ID. You can only see your test result with your anonymous test ID. Place the card with the two circles facing up on the table.
3. Stimulate blood flow by making big circles with your arm or shaking the hand downwards for 20 seconds.
4. Take out the single-use lancet. Remove the transparent safety cap and the lancet is ready to use. Use the alcohol wipe to clean the tip of your finger (middle finger is recommended).
Place the lancet against the lower part of the fingertip facing the collection paper on the table. Push the top of the lancet towards the finger until you hear a click. The lancet will automatically make a small prick in the finger.
5. Do not touch the filter paper with your fingers.
6. Fill one circle at a time with blood. Squeeze your finger gently and wait for a drop of blood to fall inside the circle by itself. If one drop of blood does not cover the circle, allow one more drop from your finger to drip immediately. Leave the sample card in a horizontal position at room temperature for at least 10 minutes for the samples to dry well.
7. Insert the sample card back into the paper envelope. Then place the paper envelope into the metal bag and close it.
IMPORTANT:Do not remove desiccant packet inside the metal bag.
8. Place the closed metal bag into the big envelope with the laboratory address on it. NOTE! You must put the correct amount of postage stamps on the envelope before you put in the mail box.
Register your test code on www.zinzinotest.com. This is the web page where you can see your test result later. It takes 10-20 days until your result is ready.
IMPORTANT:Keep the SAVE part of the card. You can only see your test result with your anonymous test ID.
RELATED PRODUCTS
Kit Content
Share this page
Or copy link